SHIPSETS
If not 100% pleased you can always return for a complete refund.
Web form for Mail in or Fax orders.
Gold Medal Models line of BRASS ETCHED detail sets are the best on the market.
SHIPSETS
If not 100% pleased you can always return for a complete refund.
Web form for Mail in or Fax orders.
Gold Medal Models line of BRASS ETCHED detail sets are the best on the market.
| Order # | Item | Description | Price |
| LP-700-1 | NAVAL SHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. *Fits all 1/700 & 1/720 USN, British, Canadian, French, Italian, and other European warship kits. | $18.50 |
| LP-700-2 | MERCHANT SHIP | Railing in several styles, vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania. *Fits all 1/700 waterline kits of merchant ships, hospital ships, and ocean liners. | $18.50 |
| LP-700-3 | WORLD WAR TWO USN BATTLESHIP | Railing in several styles including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery crane, cable reels, 20mm gun armor shields, funnel cap grilles, Mk. 37 director radars, SK, SK-2, Mk. 3, Mk. 27, and SG radars, ECM antennas, yardarms, bridge window frames, aircraft propellers, watertight doors, and assorted bulkhead details. *Fits all 1/700 kits of fast battleships - includes additional cranes, catapults, and many other parts. NOTE: Bulkhead details, Mk 27 and SG radars, W.T. doors, and 20mm gun armor shields are not included. | $18.50 |
| LP-700-4 | YAMATO / MUSASHI | Railing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. *Fits Tamiya 1/700 waterline kit Includes 25mm single a a guns. | $18.50 |
| LP-700-5 | WORLD WAR TWO GERMAN WARSHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails. (NOTE: Watertight doors, and bulkhead details included in the 1/350 version only.) *Fits all 1/700 waterline kits of WW2 German warships. | $18.50 |
| LP-700-6 | KING GEORGE V / PRINCE OF WALES | Railing in several styles including pre-shaped sections for upswept bow Vertical and inclined ladders, funnel cap grilles, aircraft propellers, search and fire control radars, crane details, boat details, yardarm footropes, 20mm gun armor shields, watertight doors, bulkhead details. *Fits all 1/700 waterline kits of WW2 British warships | $28.00 |
| LP-700-7 | WORLD WAR TWO USN AIRCRAFT CARRIER | Railing in several styles including elevator pit safety rails, vertical and inclined ladders, flight deck antennas and gallery catwalks, mast yardarms and details, elevator support structure and safety nets, radar platforms, aircraft propellers, SK, SK-2, SC, SC-2, Mk.12, and Mk. 22 radars, YE beacons. Fits all 1/700 kits of Lexington, Yorktown, and Essex-class carriers. | $18.50 |
| LP-700-8 | WORLD WAR TWO USN CRUISER / DESTROYER | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, depth charge tracks and stowage racks, K-gun loading racks, aircraft catapults and recovery crane, DD and DE yardarms, DD and CL propeller guards, DD, CA, and CL-style funnel cap grilles, aircraft propellers, SA, SC, SC-2, Mk. 12, and Mk. 22 radars, DD life raft racks. Fits all 1/700 kits of WW2 USN destroyers, destroyer escorts, and cruisers. | $28.00 |
| LP-700-9 | MODERN SOVIET WARSHIP | Railing in several styles, vertical ladders, Kiev-class yardarms and crane boom, Krivak-class masts and yardarms, Top Sail, Top Steer, Head Net C and Pop Group radars, life rings. Fits all 1/700 waterline kits of Soviet Navy warships | $28.00 |
| LP-700-10 | MODERN USN / JMSDF WARSHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety nets, SH-60 helicopter rotors, yardarm footrails and anemometers, screws for Spruance and Ticonderoga-class ships (1/350 version only), SPS-6, SPS-10, SPS-12, SPS-29, SPS-40, SPS-49, and OPS-14B radars, masts and platforms for FF-1052 and FFG-7 class ships. *Fits all 1/700 kits of modem USN and Japanese Maritime Self Defense Force ships (no ships' screws) | $28.00 |
| LP-720-11 | USN SUPERCARRIERS | Enlarged and upgraded set features railing, ladders, flight deck safety nets, eight different radar masts, SPS-10, SPS-12, SPS-43A, SPS-49, and SPN-6 radars, anchors, E-2 Hawkeye propellers, boat fenders, "Tilly" crane boom, other structures. Fits all modern CV, CVA, CVAN, and CVN aircraft carrier kits by Testors, Italeri, and Revell. | $28.00 |
| LP-700-12 | IJN BATTLESHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, searchlight towers for several battleship classes, aircraft catapults and recovery cranes, radar, Ise and Hyuga-class flight deck support girders, aircraft propellers **Fits all Nichimo kits of Imperial Japanese Navy battleships except Yamato and Musashi. | $18.50 |
| LP-700-13 | IJN CRUISER / DESTROYER | Railing in several styles, including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery cranes, boat cranes, aircraft propellers, turret antenna masts, torpedo loading gantries, searchlight towers, cranes and flight deck girders for seaplane tender Chitose. *Fits all 1/700 kits of WW2 IJN cruisers, destroyers, and destroyer escorts. | $18.50 |
| LP-700-14 | IJN AIRCRAFT CARRIER | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety netting, girders and antennas, funnel and mast braces, radars, aircraft propellers *Fits all 1/700 kits of WW2 IJN aircraft carriers. | $18.50 |
| LP-700-15 | MODERN BRITISH WARSHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, Sea King helicopter rotors, flight deck safety nets, post-war HMS Tiger mast and yardarms, Type 277, 278, 285, and 965 radars, crane booms and rigging Fits all 1/700 kits of modern British warships. | $17.00 |
| LP-700-16 | BRITISH AIRCRAFT CARRIER (WW2 & POSTWAR) | Railing in several styles, vertical and inclined ladders, flight deck antennas, cranes, post-war Ark Royal mast and yardarms, Type 277, 285, 982, and 983 radars, aircraft propellers, and Wessex rotors Fits all 1/700 kits of WW2 and post-war British aircraft carriers. | $18.50 |
| LP-700-17 | NAVAL FIGURES (Set of 100) | 100 figures, assorted poses, relief etched in brass. *Fits all 1/720 through 1/600 naval ship models. | $7.00 |
| LP-700-18 | WW2 CARRIER AIRCRAFT PARTS (Equips 124 IJN & USN aircraft) | Provides highly detailed propellers, landing gear, and tailhooks for up to 124 USN and IJN aircraft of twelve different types. Can also be adapted to other types. | $8.00 |
| LP-700-19 | EXTRA LADDERS AND ACCOMMODATION LADDERS | Provides extra sections of vertical ladders in two styles, and extra sections of inclined ladders in three styles. NOTE: 1/700 version also includes ten accommodation ladders in five sizes.) *Fits all 1/720 and 1/700 models. | $7.00 |
| LP-700-20 | ANCHORS AND CHAINS (72 anchors, 6 styles, 4 each in 3 sizes) | 72 anchors in six styles, four of each style in three sizes each. Includes 1,000 scale feet of simulated stud-link anchor chain. | $7.00 |
| LP-700-21 | 20mm CANNONS (Set of 60 with armor shields) | 60 cannons with armor shields. Features gunsights, shoulder rest, and elevation wheel detail. Each gun comprises a total of two parts. | $7.00 |
| LP-700-22 | WATERTIGHT DOORS (186 doors in USN, IJN & RN styles, hatches, fires hoses, life rings) | An assortment of standard size watertight doors for bulkheads plus assorted hatches in several styles for decks, draped fire hoses on racks, and life rings. *Fits all 1/700 and 1/720 models. | $7.00 |
| LP-700-23 | GOLD PLUS ULTRA-FINE RAILING | Railing in nine styles including pre-shaped sections for upswept bow. Includes several sections with destroyer-style netting. Etched in .003" brass. Ultra-fine detail for expert use only. Fits all 1/700 kits of USN and European warships. | $22.50 |
| LP-700-24 | WORLD WAR TWO USN ESCORT AND LIGHT CARRIERS | Railing in several styles including pre-shaped sections for upswept bow, vertical and inclined ladders, CVL masts, yardarms, and platforms in two styles, CVE mast, yardarm, and platform, CVL crane boom and funnel supports, SK, SC, and SC-2 radars, YE beacons, aircraft propellers. Fits all 1/700 kits of Bogue and Independence-class carriers. | $18.50 |
| LP-700-25 | GOLD PLUS I.J.N. ULTRA-FINE RAILING | Railing in six styles including pre-shaped sections for upswept bow. Features "drooped chain". Style and solid-style rails. Includes cap strips for linoleum decks on cruisers and destroyers. Etched in .003" brass. Ultra-fine detail for expert use only. Fits all 1/700 kits of WW2 Imperial Japanese Navy warships. | $22.50 |
| LP-700-26 | USS TARAWA/SAIPAN | Railing, ladders, flight deck nets, SPS-40 & SPS-10 radars, crane details, helicopter rotors, antennas. Fits Dragon/DML kits of Tarawa and Saipan. Can also be used on Revell kits of same ships. | $28.00 |
| LP-700-27 | IJN AUXILIARY SHIP | Railing, ladders, cranes, catapults, deck structures, aircraft details, masts & yardarms, funnel cap grilles. Fits Skywave's Chogei, Jingei, Akashi, and Akitsushima kits plus Aoshima's Chitose and Chiyoda kits. Enough parts for two models. | $28.00 |
| LP-700-28 | ASSORTED CABLE REELS | A set of 48 cable reels in twelve styles, four reels of each style. Includes USN, IJN, RN, and KM designs. Relief-etched in 3-D for extra detail. Stainless steel. Can be used with all 1/700 scale model ship kits. | $7.00 |
| LP-700-29 | USS WASP-CLASS LHD | Railing, ladders, flight deck nets, SPS-49 & SPS-10 radars, "Tilly" crane and forklift details, helicopter rotors, anchors, cable reels, hull doors, island floodlights, mast details, more. ADVISORY: The real ships of this class feature an unusual system of overhanging decks on the hull sides with smaller platforms supported by a complex series of stanchions. The GMM set supplies dedicated pre-shaped rails with stanchions to fit these areas along with gaps and slots provided for small protruding platforms. Some of these delicate parts will be challenging to install and are recommended for expert modelers only. Other modelers may wish to delete strips of stanchions in some areas or to cut the rail and stanchion strips into shorter lengths to ease installation. Fits Revell of Germany kits of Wasp and Essex-class assault ships. | $28.00 |
| LP-700-30 | MODERNIZED USS NEW JERSEY/IOWA | MODERNIZED USS NEW JERSEY/IOWA (parts for 1968 and 1982 versions). Railing in several styles including pre-shaped railing sections for upswept bow, vertical and inclined ladders, flight deck safety netting, aircraft crane, SPS-6, SPS-10, and SPS-49 radars, SH-60 helicopter rotors, UnRep gear and hose details, bridge window frames, various ECM and mast details. Fits Skywave/Pitroad modernized USS New Jersey and USS Iowa. | $18.50 |
| LP-700-31 | MODERN SOVIET AIRCRAFT CARRIER (1/700) | The No. 700-31 Soviet Aircraft Carrier set provides parts for the Trumpeter Kiev/Minsk kits, the Aoshima Kiev/Minsk kits, and the Italeri Admiral Kuznetsov kit. The pre-shaped flight deck rails and 3-D relief-etched flight deck safety nets are designed to fit all the above-mentioned plastic kits precisely (separate parts are provided for Aoshima's and Trumpeter's Kiev-class kits due to slight differences in the shapes of the kit parts), as do all the radars, masts, deck crane, and yardarms. The No. 700-31 Soviet Aircraft Carrier set provides parts for the Trumpeter Kiev/Minsk kits, the Aoshima Kiev/Minsk kits, and the Italeri Admiral Kuznetsov kit. The pre-shaped flight deck rails and 3-D relief-etched flight deck safety nets are designed to fit all the above-mentioned plastic kits precisely (separate parts are provided for Aoshima's and Trumpeter's Kiev-class kits due to slight differences in the shapes of the kit parts), as do all the radars, masts, deck crane, and yardarms. | $28.00 |
| LP-700-32 | Lexington/Saratoga | The No. 700-32 Specialized railing in several styles with numerous pre-shaped and pre-sized sections for ease of installation; pre-sized safety railing for the No. 2 elevator; fold-to-shape inclined ladders in several sizes; vertical ladders; watertight doors in two correct styles with open and closed options; CXAM-1 radar; D.F. loop antennas; pre-sized and correctly patterned safety rails and safety nets for the flight deck; structural supports for several areas of the ship; details for aircraft and ship's boats; two-position flight deck palisades (windbreak) with correct nimber of panels; replacement yardarm with doublers; life raft paddles; see-through life raft bottoms; pilot house equipment; funnel cap grilles; cable reels in two styles; armor shields for 20mm Oerlikons, Rails for 5" 25 caliber antiaircraft guns; arresting gear sheaves and barricade supports; correct three-bladed screws for the ship's four propeller shafts; and a figure of Captain Frederick C. Sherman, Lexington's last commanding officer. Extra railings and other fittings included for pre-1942 versions. Fits the Trumpeter kits. | $18.50 |
| LP-700-33 | NIMITZ | Custom-tailored to fit the Trumpeter 1/700 scale Nimitz and her sisterships. Features custom-fitted hull railings and elevator railings, other railing in several styles, vertical and inclined ladders, flight deck safety nets, radar masts for all ships in the class, SPS-10/SPS-67, SPS-12, SPS-43A, SPS-48, SPS-49, anchors, transom boat fender, jet blast deflector rams, sector antennas, ECM antennas in several styles, refueling hose reels, other structures. | $28.00 |
| LP-700-33A | 1/4 CVN 1/4 AIR WING DETAILS | (This set will equip any of the aircraft for Trumpeter's 1/700 scale USS
Nimitz-class aircraft carrier kits. It is intended to equip one fourth of a full
air wing with a few parts left over. Four of these sets will be required if a
modeler wishes to replicate a full air wing. Three sets will fill the flight
deck and leave a few planes left for the hangar. Two sets will give a flight
deck a busy look and leave one or two planes for the hangar, a good choice for
budget-minded modelers.
This is still a fairly large set and will equip the following aircraft: Six (6) F-14 Tomcats; Six (6) A-6 Intruders and/or EA-6B Prowlers; six (6) A-7 Corsair II's; ten (10) F/A-18 Hornets; six (6) F-4 Phantoms; Three (3) S-3 Vikings; Two (2) E-2 Hawkeyes; Two (2) SH-3 Sea Kings; Two (2) RA-5C Vigilantes; Two (2) EA-3B Skywarriors; and Three (3) SH-60 Seahawks. Total number of aircraft of all types: forty-eight (48.) Not all types will be used at one time on one ship. Extra parts are provided in the event of loss or damage. In addition, over 80 underwing bomb racks in six styles for several aircraft and 14 Sidewinder missile racks for A-7 Corsairs are supplied. Tailhooks for several aircraft are furnished (some models of aircraft don't need them because their hooks are completely concealed when not in use) and boarding ladders for A-6, EA-6B, and F-4 aircraft are also included. Also furnished are eight (8) refueling probes for A-6 and EA-6B aircraft. Cabin doors and SAR winches are supplied for the SH-3 Sea Kings. Extended nose gear struts for F-4 Phantoms are also furnished for aircraft about to be catapulted. Extensive relief etching is employed for added detail on wheels, rotors, and numerous other parts. | $14.50 |
| LP-700-34 | SARATOGA CV3 | Specialized railing in several styles with numerous pre-shaped and pre-sized sections for ease of installation; watertight doors & pre-sized rails for tops of 8" gun turrets; pre-sized safety railing for the No. 2 elevator; fold-to-shape inclined ladders in several sizes; vertical ladders; watertight doors in two correct styles with open and closed options; D.F. loop antennas; pre-sized and correctly patterned safety rails and safety nets for the flight deck; structural supports for several areas of the ship; details for aircraft and ship's boats; boat chocks in two sizes; two-position flight deck palisades (windbreak) with correct number of panels; replacement yardarms with doublers; pilot house equipment; funnel cap grilles; cable reels in two styles; funnel boat deck braces; details for 5" 25 caliber antiaircraft guns; arresting gear sheaves and barricade supports; and correct three-bladed screws for the ship's four propeller shafts. Fits the Trumpeter kit. | $18.50 |
| LP-700-35 | 1/4 1930's AIR WING | Propellers, interplane struts, cabane struts, wheels, and tailhooks for 1930's USN carrier-based aircraft of the following types: BFC, TG-2, F2F, F3F, SBC, SBU, SB2U and F2A (no wing struts are required for last two types.) Also includes antennas masts for F2A and SB2U monoplanes. Equips six each of all types for a total of 48 aircraft. User-friendly design to ease assembly. Relief-etched for extra detail. | $9.00 |
| LP-700-1D | NAVAL SHIP DECALS (1/700 - 1/720 SCALE) | Shaded hull numbers (5/16", 7/32", and 1/8" tall in 1/350 scale; 5/32", 7/64" and 1/16" tall in 1/700 scale), unshaded hull numbers (1/16" tall in 1/350 scale; 1/32" tall in 1/700 scale), Roman and Arabic numeral draft marks, catapult aircraft insignia, warning stripes, auxiliary ship hull markings, Plimsoll marks, various carrier flight deck stripes, hangar door stripes, "E" efficiency markings in white and red. Two sheets each. | DISCONTINUED |
| LP-700-2D | WW2 USN AIRCRAFT CARRIER DECALS (1/700 - 1/720 SCALE) | Flight deck numbers in black and white (1-1/16" tall), dashed flight deck striping in black and white, white elevator outlines, ships' names, and aircraft insignia in early and late war styles.Two sheets | $6.00 |
| LP-700-3D | NAVAL AIRCRAFT INSIGNIA DECALS (1/700 - l/720 SCALE) | Includes national insignia and other markings for US, British, Japanese, German, French, and USSR carrier and catapult aircraft. Early and late WW2 plus postwar markings included. Over 700 separate markings. | DISCONTINUED |
| LP-700-4D | USN SUPERCARRIER DECALS | FOR
ALL SHIPS: Eight red warning circles in two sizes for rotating weapons
mounts; twelve bomb jettison ramp markings for flight decks; assorted awards
with hashmarks in full color and in two sizes for bridge wings; yellow &
red flight deck elevator and ordnance elevator striping; white and red
forward flight deck striping; ten sets of underwater hull draft markings in
black & white; 18 sets of Flight Deck Electrical Power Hatch striping;
ships' names ranging from Forrestal (CV-59) to George H. W. Bush (CV-77.)
FOR ENTERPRISE: Hollow white outlined flight deck numbers in the correct shape; "Big E" marking for rear of island; "USS ENTERPRISE CVN-65" titles for the island front in two sizes and three variations for three different eras; Aviation Boatswains' Mates' Wings, ship's plaque, and small black eagle for lower island front; five "Beware of Jet Blast Propellers and Rotors" signs in four styles for different eras; "Hormuz Highway Patrol", kill marks, and related awards for late 1980's period. FOR NIMITZ-CLASS: Correctly shaped hollow and solid numbers for flight decks including one set of oversize solid "68" numerals for an early Nimitz; correctly shaped shadowed and non-shadowed white numbers for islands of all ships in the class; assorted island signs for damage control equipment; twelve different sets of Aviation Boatswains' Mates' wings for all ships' island fronts to represent a variety of eras; and nine sets of "Beware of Jet Blast Propellers And Rotors" warning signs for islands representing all ships and several eras. The heavily illustrated instruction sheet provides detailed information on usage and proper display of all the above markings.
| $9.00 |
| LP-700/350-1D | INTERNATIONAL FLAG DECALS (1/700 & 1/350 SCALE) | Ensigns and jacks for US, Canada, UK, Australia, Germany, France, Japan, and USSR from 1933 to 1990 in four sizes each, and merchant house flags for ten lines (Cunard, United States Lines, etc.) in two sizes each. All flags in "windblown" format. Also includes Canadian Maple Leaf funnel insignia in two sizes. Over 200 flags in all. 1/350 and 1/700 ensigns measure five scale feet tall by eight scale feet long.One sheet | DISCONTINUED |
| LP-600-1 | NAVAL SHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. **Fits All Airfix 1/600 kits and Revell 1/570 kits. | $20.50 |
| LP-600-2 | MERCHANT SHIP | Railing in several styles, vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania. Fits all 1/600 and 1/570 ocean liner kits by Airfix and Revell. | $20.50 |
| LP-600-3 | KING GEORGE V | Railing in several styles including pre-shaped sections for upswept bow Vertical and inclined ladders, funnel cap grilles, aircraft propellers, search and fire control radars, crane details, boat details, yardarm footropes, 20mm gun armor shields, watertight doors, bulkhead details. **Fits all Airfix 1/600 kits of WW2 British warships. | $20.50 |
| LP-600-4 | BISMARCK | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails.**Fits all Airfix 1/600 WW2 German warship kits. | $20.50 |
1/500 scale |
| LP-500-1 | YAMATO | Railing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. **Fits Nichimo 1/500 kit. | DISCONTINUED |
| LP-500-2 | IJN BATTLESHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, searchlight towers for several battleship classes, aircraft catapults and recovery cranes, radar, Ise **Fits all Nichimo kits of Imperial Japanese Navy battleships except Yamato and Musashi. | $29.50 |
| LP-500-3 | IJN CRUISER / DESTROYER | Railing in several styles, including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery cranes, boat cranes, aircraft propellers, turret antenna masts, torpedo loading gantries, searchlight towers, cranes and flight deck girders for seaplane tender Chitose. **Fits all Nichimo kits of Imperial Japanese Navy Cruisers and Destroyers | $29.50 |
| LP-500-4 | IJN AIRCRAFT CARRIER | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety netting, girders and antennas, funnel and mast braces, radars, aircraft propellers **Fits all Nichimo kits of Imperial Japanese Navy Aircraft Carriers | $29.50 |
| LP-500-5 | NAVAL SHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. Fits all 1/450 through 1/500 kits Also fits classic Revell kits of Haven and Hope as well as Monogram's Columbus and Chicago. Specific parts for Haven/Hope include helicopter deck netting, deck supports, crane boom rigging, etc. Specific parts for Monogram's Columbus and Chicago include SPS-43 radar, helicopter deck netting, etc. | DISCONTINUED |
| LP-540-6 | REVELL MIDWAY / FORRESTAL / ESSEX (equips one model) | Railing in several styles, vertical and inclined ladders, elevator details, flight deck safety nets and antennas, radars, island and mast details, watertight doors, ship's screws, aircraft propellers. Fits classic Revell kits of post-war Midway, Forrestal. and Essex-class aircraft carriers. | $69.00 |
| LP-400-1 | NAVAL SHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, life preservers, pulley block rigging. Radars: SK, SC, SC-2, 3, 4, &5, SA, SA213, SR, SRa, SRb, SR-5, SV. SJ, FuMo 61, and assorted radar grids for custom work. ****Fits all Heller 1/400 kits. Also fits classic Revell kits of Hawaiian Pilot, Doctor Lykes, Burleigh, Pine Island, Norton Sound, J. L. Hanna, Mission Capistrano, Randall, and Montrose. Specific parts for Pine Island include crane booms, PBM propellers, 20mm Oerlikon guns, SK-2 radar, etc. | $69.00 |
| LP-400-2 | WATERTIGHT DOORS | An assortment of standard size watertight doors for bulkheads plus assorted hatches in several styles for decks, draped fire hoses on racks, and life rings. **Fits all 1/400 and 1/450 models | $7.00 |
| LP-429-3 | REVELL ARIZONA | Railing in several styles, vertical and inclined ladders, aircraft catapults, aircraft recovery crane, boat crane details, aircraft propellers and struts, mast yardarms, boat details, watertight doors, gun shields, gun tub and bulkhead details. Parts for 1936 and 1941 versions. Fits classic Revell kit of Arizona. Can also be used to build Pennsylvania. | $44.00 |
| LP-480-4 | REVELL YORKTOWN / HORNET / ENTERPRISE (equips one model) | Railing in several styles, vertical and inclined ladders, elevator pit safety rails, radars, mast and island details, boat details, watertight doors, ship's screws, aircraft propellers. Fits classic Revell kits of World War Two Yorktown, Hornet and Enterprise aircraft carriers. | $69.00 |
| LP-400-5 | WORLD WAR TWO GERMAN WARSHIP | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails. (NOTE: Watertight doors, and bulkhead details included in the 1/350 version only.) *Fits all 1/700 waterline kits of WW2 German warships. | $69.00 |
| LP-400-6 | EXTRA LADDERS | Provides extra sections of vertical ladders in two styles, and extra sections of inclined ladders in three styles. NOTE: 1/700 version also includes ten accommodation ladders in five sizes.) **Fits all 1/350 and 1/400 models. | $7.00 |
| LP-450-7 | MERCHANT SHIP | Provides railing in several ocean liner styles, stairs in three sizes, ratlines, two styles of wireless antenna spreaders, two types of docking bridge supports, cargo crane details, ship's wheel, life rings, and simulated pulley rigging. Fits ocean liner and merchant ship kits in 1/450, 1/400, and nearby scales. | $45.00 |
| LP-450-8 | IJN CARRIER AKAGI | Provides railing in several styles including "drooped chain" and solid bar, inclined ladders in three sizes, vertical ladders, mast details, deck edge antennas, flight deck support girders, flight deck safety nets, two flight deck windbreaks, two boat monorail extensions, aircraft propellers and landing gear, four D.F. antennas, island yardarms and mast braces, conning station windows, four flight deck searchlight doors, and over 100 relief-etched crew figures including replicas of Admirals Nagumo and Yamamoto. Fits Hasegawa plastic kit of IJN Aircraft Carrier Akagi in 1/450 scale. | $69.00 |
| LP-400-9 | Queen Mary 2 | This large new set provides dedicated pre-sized and pre-shaped railing sections for the entire ship in all the correct styles and with assorted relief-etched detailing etched into the rails integrally where needed; special handrails for swimming pools and jacuzzis; special guardrails for spare propeller blades; dedicated handrails for all stairways including stairwell railings; vertical ladder; life rings; inflatable lifeboat gantries in two styles; handwheels for inflatable lifeboat cranes; pool patio lights; cafe rails; cafe furniture (chairs and tables); tennis court net and four racquets; basketball backboard and hoop assemblies; shuffleboard sticks for optional shuffleboard decals supplied in Revell kit; 3-D relief-etched clocks in several styles and two sizes; over 300 pieces of deck furniture in several styles; CCTV cameras; 3-D relief-etched figure of Captain Ron W. Warwick; detailed painting instructions for all parts. Fits Revell/Germany's 1/400 scale kit of Queen Mary | $69.00 |
| LP-400-10 | WARD/FOUR PIPER | Presized and pre-shaped railings (includes built-in camber for athwartships rails to match Mirage kit decks) for 90% of the ship's decks including optional sizes for different applications; optional simulated canvas-covered railing for upper decks and platforms; vertical and inclined ladders matched in size to the kit's dimensions; detailed searchlight platform tower; see-through bottoms & paddles for life rafts; rudders for ship's boats; detailed manropes for boat davits; depth charge racks; choice of two styles of see-through bridge window frames; ship's helms; detailed replacement yardarms for both masts; D.F. antennas; replacement grilles for funnel caps; watertight doors in open & closed positions; life rings; cable reels for custom work; replacement gunshield for No. 1 4-inch gun mount on Ward; gunsights, handwheels, armor shields, & shoulder rests for 20mm Oerlikon cannon; figure of Ward's captain LCDR William W. Outerbridge. | $17.50 |
| LP350-1D | NAVAL SHIP DECALS (1/350 - 1/400 SCALE) | Shaded hull numbers (5/16", 7/32", and 1/8" tall in 1/350 scale; 5/32", 7/64" and 1/16" tall in 1/700 scale), unshaded hull numbers (1/16" tall in 1/350 scale; 1/32" tall in 1/700 scale), Roman and Arabic numeral draft marks, catapult aircraft insignia, warning stripes, auxiliary ship hull markings, Plimsoll marks, various carrier flight deck stripes, hangar door stripes, "E" efficiency markings in white and red. Two sheets each | DISCONTINUED |
| LP-350-1 | MODERN NEW JERSEY (Parts for 1982 and 1968 versions) | Railing in several styles including pre-shaped railing sections for upswept bow, vertical and inclined ladders, flight deck safety netting, aircraft crane, SPS-6, SPS-10, and SPS-49 radars, helicopter refuelling stations, SH-60 helicopter rotors, UnRep gear details, bridge window frames, life raft backs, funnel cap grilles, various ECM and mast details, Stokes litters, watertight doors and assorted bulkhead details. Fits Tamiya or Revell modernized USS New Jersey. | $69.00 | |
| LP-350-2 | ENTERPRISE CVAN65 | Railing in several styles including specialized rails for mast yardarms and aircraft elevators, vertical and inclined ladders, accommodation ladders, pre-shaped flight deck safety netting, aircraft refuelling hose reels, island safety cage ladders, perforated mast yardarms, SPS-10, SPS-48, and SPS-49 radars, SatCom and RDF antennas, watertight doors, bicycles, and Stokes litters.Fits Tamiya nuclear-powered aircraft carrier Enterprise (CVN-65).(SEE ALSO: LP-350-2A 1/350 Enterprise Elevators) | $69.00 | |
| LP-350-2A | ENTERPRISE ELEVATOR PLATFORMS | Perforated elevator platforms to replace the four solid plastic platforms included in Tamiya kit of CVN-65 USS Enterprise in 1/350 scale. Etched in heavy sheet brass with full see-through gridwork, reinforcing strips, tie-down rings, and even the extended plating on Elevator No. 2 as seen in prototype reference photos. Sheet styrene can be used for side plating on underside by using the kit's elevators as guides, or the plastic side plating may be carefully cut away from the Tamiya elevators and transferred to the etched brass versions if desired. These four etched platforms are exact matches for the plastic parts to ensure a precise fit. Instructions are etched into the edge of the brass sheet. Fits Tamiya nuclear-powered aircraft carrier Enterprise (CVN-65). | $41.50 | |
| LP-350-3 | MERCHANT SHIP (Titanic / Lusitania) | Railing in several styles, vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania. Fits Entex/Minicraft Titanic and Entex/Gunze/Revell Lusitania. Also see sheet LP-350-15 for further detail parts for these models. | $69.00 | |
| LP-350-4 | WORLD WAR TWO BATTLESHIP MISSOURI (UPGRADED!) | Railing in several styles including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery crane, cable reels, 20mm gun armor shields, funnel cap grilles, Mk. 37 director radars, SK, SK-2, Mk. 3, Mk. 27, and SG radars, ECM antennas, yardarms, bridge window frames, aircraft propellers, watertight doors, and assorted bulkhead details. **Fits Tamiya or Revell Missouri. Includes surrender table & chairs. | $69.00 | |
| LP-350-4A | GOLD PLUS MISSOURI FINE DETAILS | Recommended for experienced modelers only. Provides armor shields (with forming template), pre-shaped gunsights, & pre-sized safety railing for 40mm Quadruple Bofors anti-aircraft gun mounts, pre-shaped and highly detailed ready ammunition racks for all twenty 40mm Quad Bofors gun tubs; safety railing for No. 2 16" gun turret with drilling jig; vertical and inclined ladders; four sets of accommodation ladders with rigging and bridles; detailed boat cradles; gunsights and access doors for 5" 38 cal. gunhouses; SC-2, SR, and SP radars for other ships of the Iowa-class; perforated access platforms for aft searchlight tubs; perforated platforms with matching railing for funnel caps; highly detailed relief-etched deck hatches and watertight doors in several styles; a full set of older style armor shields for 20mm Oerlikon guns as carried on Iowa; leadsman's platforms; capstan brakewheels; assorted handwheels in several sizes and styles, windshield wipers for bridge windows; detailed relief-etched armored windows and doors for conning tower; 3-D relief-etched covers for all 20mm ready ammunition lockers; pre-shaped conical railing for aft topmast platform; perforated platforms and pinrails for flagbags; highly detailed 3-D relief-etched oxygen and acetylene compressed gas bottles in racks for detailing bulkheads; and extra bulkhead mounted cranes. Complements GMM No. 350-4 WW2 Missouri ship set. (NOTE: This set be used with the older 350-4 WW2 Missouri set as well as the new (2003) and improved version.) Fits Tamiya WW2 battleship Missouri. | $69.00 | |
| LP-350-5 | YAMATO/MUSASHI | Railing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. ***Fits Tamiya 1/350 kit (SEE ALSO: 350-5A Gold PLUS Yamato/Musashi Fine Details) | $69.00 | |
| LP-350-5A | GOLD PLUS YAMATO/MUSASHI FINE DETAILS | Provides the following fittings: two see-through grilles for the sides of the aft main deck, assorted see-through ventilator grilles for the superstructure, 34 support structures for overhanging decks (1/350 version only - not required in 1/200 version), 3-D relief-etched aircraft trolley track rails and turntables with drilling jig, 32 25mm gun bases, 30 assorted watertight doors, assorted deck hatches, two hawsepipes with covers (1/200 version provides covers only), three strips of bridge window frames, six life buoys with two release racks, four correctly detailed searchlight bases, 15 detailed inclined ladders in four sizes, ten leadsman's and sounding platforms in two styles, two foghorn platforms, a full set of 25mm ammunition box covers, 24 boat oars, six small antennas (1/350 version only), two Type 21 "GO" radar braces, and a Musashi-specific crane kingpost (1/350 version only), 46 mm gun brackets and blast bag baskets (1/200 version only.) Complements GMM No. 350-5 Yamato/Musashi shipset or No. 200-1 Yamato shipset. 1/350 scale version fits Tamiya WW2 battleships Yamato or Musashi; 1/200 scale version fits Nichimo Yamato kit. | $38.00 | |
| LP-350-6 | BISMARCK/TIRPITZ | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails. (NOTE: Watertight doors, and bulkhead details included in the 1/350 version only.) *Fits all 1/700 waterline kits of WW2 German warships. | $69.00 | |
| LP-350-7 | KING GEORGE V/PRINCE OF WALES | Railing in several styles including pre-shaped sections for upswept bow Vertical and inclined ladders, funnel cap grilles, aircraft propellers, search and fire control radars, crane details, boat details, yardarm footropes, 20mm gun armor shields, watertight doors, bulkhead details. ***Fits Tamiya 1/350 King George V and Prince of Wales. | $69.00 | |
| LP-350-8 | NAVAL FIGURES (Set of 100) | 100 figures, assorted poses, relief etched in brass. **Fits all 1/400 and 1/350 naval ship models. | $7.00 | |
| LP-350-9 | EXTRA LADDERS | Provides extra sections of vertical ladders in two styles, and extra sections of inclined ladders in three styles. NOTE: 1/700 version also includes ten accommodation ladders in five sizes.) **Fits all 1/350 and 1/400 models. | $7.00 | |
| LP-350-10 | 40mm (25) & 20mm (60) GUN DETAILS | Gunsights, railing, shields, and other details for equipping twenty-five40mm quad Bofors and sixty 20mm Oerlikon anti-aircraft guns. Fits Tamiya Missouri, King George V, and Prince of Wales, plus others. | $12.00 | |
| LP-350-11 | WATERTIGHT DOORS | (172 doors, hatches, fire hose racks, & life rings)An assortment of standard size watertight doors for bulkheads plus assorted hatches in several styles for decks, draped fire hoses on racks, and life rings. ***Fits all 1/350 models. | $7.00 | |
| LP-350-12 | MODERN USN WARSHIP (Spruance, Ticonderoga, & other classes) | Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety nets, SH-60 helicopter rotors, yardarm footrails and anemometers, screws for Spruance and Ticonderoga-class ships (1/350 version only), SPS-6, SPS-10, SPS-12, SPS-29, SPS-40, SPS-49, and OPS-14B radars, masts and platforms for FF-1052 and FFG-7 class ships. **Fits DMLRevell Spruance and Ticonderoga kits (no FF or FFG masts or JMSDF OPS-14B radar) | $69.00 | |
| LP-350-13 | EMDEN/DRESDEN | Railing in several styles, vertical and inclined ladders, accommodation ladders and davits, ratlines, boat details, ship's wheels, compass platform, mast platform supports, anchor chainFits Revell Emden and Dresden kits | $44.00 | |
| LP-350-14 | WORLD WAR 2 FLETCHER-CLASS DESTROYER | Railing in several styles, with and without netting, including pre-shaped sections for bridge roof and upswept main deck. Vertical and inclined ladders, depth charges tracks and stowage racks, K-gun loading racks in single-row and double-row styles, gun details, life raft racks, propeller guards, funnel cap grilles, boat details, mast and yardarm details, Mk. 12, Mk. 22, SC, SC-2, and SG radars, ECM antennas, Stokes litters, watertight doors, capstan brake wheels and assorted control wheels. Fits Tamiya Fletcher. Includes parts for round and square bridge versions. | $44.00 | |
| LP-350-15 | Gold PLUS TITANIC/LUSITANIA DETAIL SET (Deck chairs, benches, girders, etc.) | Replacement X-frame bracing for eight cargo crane booms, crane boom supports (when cranes are stowed), wireless antenna spreaders with integral rigging fittings, docking bridge support girders, ship's wheel, replacement support legs for Titanic's compass tower, lifeboat safety ropes, and 52 fold-to-shape deck lounge chairs. We have recently doubled the size of the 1/350 set, added deck benches, and several other fittings, so it's much more comprehensive than before, specifically with the 'Titanic' in mind. Note that as a result of the much larger sheet, this now retails at a higher price.Supplements GMM No. 350-3. Specific parts for both Titanic and Lusitania kits in 1/350 scale. Illustrated instructions. | $32.00 | |
| LP-350-16 | OCEAN LINER FIGURES )Set of 218 passengers, crew, orchestra) | Ocean Liner Figures: contains over 200 figures relief-etched in 3-D in .013" thick brass for extra depth and detail. Features adult and child passengers, crew figures, and four member of ship's orchestra (three violinists and one cellist) complete with instruments. Also includes figure of Titanic Captain E. J. Smith with beard and overcoat. 3-D features include early 20th Century clothing styles including hats, coats, and ties. Fits 1/350 scale Titanic and Lusitania kits. Painting required. Illustrated instructions. | $19.50 | |
| LP-300-17 | REVELL USCG CAMPBELL / EASTWIND (AND USN BURTON ISLAND) - | Equips both Models Railing in several styles, vertical and inclined ladders, radars, helicopter rotors, helicopter deck safety nets, mast details, depth charge tracks, K-gun loading racks, gun details, crane booms. Fits classic Revell kits of USCG Campbell, Taney, Eastwind (also US Navy Burton Island). | $69.00 | |
| LP-350-18 | EXTRA USN RAILING (5,000 scale feet in five styles) | 5,000 scale feet of U.S. Navy style railing including 1, 2, and 3-bar types. Also includes simulated canvas-covered 2-bar rails and pre-curved 3-bar railing for upswept forward decks. | $38.00 | ||
| LP-350-19 | TITANIC LIFEBOAT DAVITS (Set of 20 plus spare parts) | Provides replacement davit assemblies (with spares) in 3-D relief-etched .010" brass for Minicraft's 1/350 scale Titanic kit. Can be assembled either in stowed or deployed positions. Fits Minicraft 1/350 scale Titanic kit. Painting required. Illustrated instructions. | $37.50 | ||
| LP-350-20 | KONIG-CLASS DREADNOUGHT WARSHIP | Over 4,000 scale feet of railing in four styles including "drooped chain" type for the main decks, solid-type rails for upper decks, and simulated canvas-covered rails for bridge and searchlight platforms; vertical ladders, inclined ladders with perforated sides and correct handrail configurations; funnel cap grilles, skylight covers in eight styles, hatch covers in two styles, watertight doors (open and closed), yardarm footropes, safety rails and hooks for boat derricks, simulated stud-link anchor chains and chain stoppers, rudders, screws, oars, & stern rails for ship's boats, capstan handwheels & brakewheel, screens and covers for bulkhead vents in five styles, torpedo tube doors in two styles, armored doors for main turrets, conning tower, & aft fire control tower, cable reel, simulated rigging for boat davits & small cranes, paddles & see-through bottoms for life rafts, perforated girders for boat cradles, accommodation ladders with perforated platforms, bow crests & stern nameplates for all four ships in the class, bridge details (helm, engine telegraph, & binnacle.) Illustrated instructions include information on backdating the ICM kit to pre-Jutland configuration. Extensive 3-D relief etching throughout. Fits ICM/Ukraine's Konig and Grosser Kurfurst WW1 dreadnought kits. | $69.00 | ||
| LP-350-21 | USS HORNET CV8 | Railing, ladders, cranes, catwalk and bridge wing supports, leadsman's platforms, CXAM and SC air search radars, Mk. 4 fire control radars, 20mm Oerlikon machine gun details, detailed yardarms, boat rudders and railings, funnel cap grilles, chocks in two styles, three-level ladder structure for island's aft end, life raft paddles, life rings, "horseshoe" life buoys with racks, cable reels, retractable flight deck and elevator safety rails, 1MC speaker faces, watertight doors, B-25 aircraft propellers, ship's screws, conversion parts for pilot house and primary flight control station, relief-etched figure of Lt.Col. James H. Doolittle. Fits Trumpeter kit of WW2 U.S.S. Hornet aircraft carrier.(SEE ALSO: 350-21A 1/350 Gold PLUS Hornet Fine Details and LP-350-26 1/350 WW2 U.S. Navy Aircraft Details) | $69.00 | ||
| LP-350-21A | GOLD PLUS HORNET FINE DETAILS | Provides the following details: See-through perforated catwalks for surrounding funnel and flight deck, arresting gear sheaves, boat chocks, more. Complements GMM No. 350-21 USS Hornet shipset. Fits Trumpeter WW2 carrier Hornet. | $69.00 | ||
| LP-350-22 | USS ESSEX CV9 | Railing (including custom fitted rails for bow and stern and specialized rails for numerous other areas such as elevators & hangar openings); twelve vertical ladders; 28 inclined ladders (including 16 short ladders for flight deck access); one boat rudder with pulpit & cradles; main and secondary yardarm; search and fire control radars (SK, SK-2, SC-2, SP, SM-1, SG, two Mk. 12 with IFF, and two Mk. 22); assorted smaller antennas (TDY, TDY-1, YE beacon, and two types of ECM antennas); two hooks for cranes; two funnel cap grilles; 28 watertight doors; two mast platform supports; five platforms and two latticework tower masts for all variations of radar installations; one whistle platform; one BM antenna platform; four cable reels; 52 carrier-style floater net baskets; five deck-edge radio antenna masts with protective screens for second and fifth antenna masts; two ventilator grilles; one LSO platform with one catwalk, two choices of windscreens, & safety net; deck-edge elevator girders & nets; three leadsman's platforms; two simulated stud-link anchor chains; and one figure of Admiral Raymond A. Spruance. Fits Trumpeter kits of WW2 U.S.S. Essex-class aircraft carriers. (SEE ALSO: 350-22A 1/350 Gold PLUS Essex Fine Details and LP-350-26 1/350 WW2 U.S. Navy Aircraft Details) | $69.00 | ||
| LP-350-22A | GOLD PLUS ESSEX FINE DETAILS | Provides see-through perforated flight deck catwalks and sub-flight deck gallery catwalks with fold-up handrails; arresting gear sheaves; flight deck barrier supports; 18 sets of fold-to-shape 40mm Quad Bofors armor shields with folding template, gunsights, & choice of early or late styles of guardrails; 60 sets of 20mm Oerlikon anti-aircraft gun armor shields, handwheels, shoulder rests & gunsights; four sets of 5" 38 cal. open gun mount guardrails; two accommodation ladders; choice of early or late styles of tripod mast braces with platforms and integral railings; four styles of fold-to-shape reproducers (loudspeakers) with support brackets; bridge platform wind deflectors; one forward LSO platform with windscreen & safety nets. Complements GMM No. 350-22 Essex ship set. Fits Trumpeter WW2 carrier Essex. | $69.00 | ||
| LP-350-23 | ASSORTED CABLE REELS (USN, IJN, RN, & KM styles) | A set of 48 cable reels in twelve styles, four reels of each style. Includes USN, IJN, RN, and KM designs. Relief-etched in 3-D for extra detail. Brass. Can be used with all 1/350 scale model ship kits. | $10.00 | ||
| LP-350-24 | WW2 USN FLOATER NET BASKETS (70 large, 30 small) | A set of 100 floater net baskets as used on World War Two U.S. Navy warships. Includes 70 large baskets and 30 small. Relief- etched in 3-D for extra detail; includes optional support brackets (two for each basket plus spares.) Brass. Can be used with all 1/350 scale WW2 USN model ship kits. | $10.00 | ||
| LP-350-25 | USS ARIZONA/PENNSYLVANIA BB39/BB38 | Equips Banner's new 1/350 scale plastic kit of the battleship USS ARIZONA. Includes precision-etched "drooped chain" rails pre-sized for the main deck, several styles of railing for all upper decks, catapults, cranes, boat and aircraft details, watertight doors, hatches, 3-D relief-etched window frames for fighting tops, vertical and inclined ladders, accommodation ladders with simulated canvas covering on the rails, range clocks with raised numbers and pointers, and 3-D relief-etched splinter shields for the open 5" gun mounts. Allows the modeler to build the kit as a 1930's version or as the ship appeared at Pearl Harbor in 1941. Also includes fold-to-shape gunshields and detailed radars for converting this kit to sistership Pennsylvania as she appeared in late 1941 through early 1942. 3-D relief etched in brass for extra detail. Can be used with all 1/350 scale 1930's - 1941 USS ARIZONA model ship kits. | $69.00 | ||
| LP-350-26 | WW2 USN AIRCRAFT DETAILS | Propellers, landing gear, and tailhooks for WW2 USN carrier-based aircraft of the following types: F4F (x 9), SBD (x 10), F6F (x 10), TBF (x 10), TBD (x 10), F4U (x 10 - includes ten 3-blade and ten 4-blade propellers), SB2C (x 10). Relief-etched for extra detail. Fits Trumpeter kits of WW2 U.S. Navy carrier-based aircraft. Can be adapted to other models as needed. | $26.00 | ||
| LP-350-27 | Sovremenny (1/350) | GMM's new Sovremenny set is unique in that it supplies both early and late mainmasts as well as highly accurate replicas of all three air search radars carried by various ships of this class: The Top Steer, Top Plate, and Plate Steer radars. Also included are Palm Frond radars (three plus one spare), a complete foremast platform and yardarm assembly, numerous perforated platforms, deployed and folded helicopter rotors, details for the ship's boats, and a wide assortment of ECM and direction finding antennas. Also included is a full set of custom-fitted main deck railing with the correct number and placement of stanchions plus openings for chocks; specialized railing sections for other areas of the ship; two accommodation ladders; a full set of watertight doors in two styles; correct four-blade screws for replacing the incorrect five-blade plastic screws supplied in the kit; flagstaff and jackstaff; inclined and vertical ladders; helicopter deck safety nets; and a pre-shaped helicopter deck landing net. A precision drilling jig is also supplied to assist in the locating of the raised rail that anchors the outer edges of the landing net. This set will allow a modeler to configure the Trumpeter kit into any version of the Russian Sovremenny destroyer class. It also features extensive 3-D relief etching in .005" brass for extra detail as well as extra fine railings and antennas. . | $69.00 | ||
| LP-350-28 | Nimitz | Contains a full set of railing in all the correct styles with 80% being custom fitted for specific decks with no cutting necessary; sixteen sets of fold-to-shape inclined ladders in the correct style and in two sizes; ten lengths of standard vertical ladders; ten lengths of safety rail vertical ladders; six sets of safety cage vertical ladders; special short lengths of inclined and vertical ladders for flight deck catwalks; four accommodation ladders in two sizes; a full set of replacement flight deck safety netting with integral fold-to-shape braces including alternate nets for late variants; SPS-10, SPS-43A, SPS-48 and SPS-49 radars; custom-fitted elevator safety rails for the flight deck and safety rails for the hangar door openings; special dedicated rails for the bridge window catwalks; 40 sets of refueling hose reels; 48 watertight doors of the correct waffle pattern style in both open and closed configurations; two replacement anchors of the correct USN pattern; various ECM, sector, and other small antennas; seven fold-to-shape Stokes litters; four anemometers; eight life preservers; 66 sets of bridge windshield wipers in three positions; and sixteen sets of elevating gear quadrants for deck-edge whip antennas. Extensive use of relief-etched detailing in 3-D is used throughout this set. Made in .005" thick brass. This set is designed to fit Trumpeter's 1/350 scale kit of the USS Nimitz (CVN-68.) It can also be used, along with GMM No. 350-29 (1/350 CVN Extra Details) to convert the Nimitz kit into other ships of the class. See GMM No. 350-29 for more information. | $69.00 | ||
| LP-350-29 | CVN Extra Details |
This set contains a full complement of highly detailed replacement aft radar masts (seven in all) with perforated platforms & braces, ladders, ECM huts, and related details for all ships of the class up to CVN-75; a detailed Landing Signal Officer's (LSO) platform with windscreen & safety nets; a full set of custom-fitted open flight deck catwalk gratings with correct grid pattern and built-in locators for fuel hose reels, antennas, etc. plus a full set of pre-shaped braces for their undersides; details for ship's boats (rudders, propellers, steering wheels & windshield), tow tractors (detailed front ends and steering wheels), & boat crane (hooks in two lengths); correct "Tilly" wreck crane boom assembly with rigging; fifty aircraft towbars; pre-shaped Underway Replenishment (UnRep) hose with simulated rigging & pulleys; fold-to-shape stern boat dock for later ships in the class; and two fold-to-shape Naval Sea Sparrow Missile (NSSM) director platforms with deflector bulwarks and braces. Extensive use of relief-etched detailing in 3-D is used throughout this set. Made in .005" thick brass. This set is designed to fit Trumpeter's 1/350 scale kit of the USS Nimitz (CVN-68) and to enhance the details in GMM's No. 350-28 (1/350 Nimitz) basic fittings set. It can also be used, along with GMM No. 350-28, to convert the Nimitz kit into other ships of the class. See GMM No. 350-28 for more information. | $69.00 | ||
| LP-350-30 | CVN 1/4 Air Wing Details |
This set will equip any of the aircraft for Tamiya's 1/350 scale USS Enterprise (CVN-65) and Trumpeter's 1/350 scale Nimitz-class aircraft carrier kits. It is intended to equip one fourth of a full air wing with a few parts left over. Four of these sets will be required if a modeler wishes to replicate a full air wing. Three sets will fill the flight deck and leave a few planes left for the hangar. Two sets will give a flight deck a busy look and leave one or two planes for the hangar, a good choice for budget-minded modelers. One set will equip all the aircraft included in Trumpeter's Nimitz kit with some parts left over. This is still a fairly large set and will equip the following aircraft: Six (6) F-14 Tomcats; Six (6) A-6 Intruders and/or EA-6B Prowlers; six (6) A-7 Corsair II's; ten (10) F/A-18 Hornets; six (6) F-4 Phantoms; Three (3) S-3 Vikings; Two (2) E-2 Hawkeyes; Two (2) SH-3 Sea Kings; Two (2) RA-5C Vigilantes; and Two (2) EA-3B Skywarriors. Total number of aircraft of all types: forty-five (45.) Not all types will be used at one time on one ship. Extra parts are provided in the event of loss or damage. In addition, 86 underwing bomb racks in six styles for several aircraft and 14 Sidewinder missile racks for A-7 Corsairs are supplied. Tailhooks for several aircraft are furnished (some models of aircraft don't need them because their hooks are completely concealed when not in use) and boarding ladders for A-6, EA-6B, and F-4 aircraft are also included as well as four non-aircraft-specific boarding ladders. Also furnished are six (6) refueling probes for A-6 and EA-6B aircraft. Cabin doors and SAR winches are supplied for the SH-3 Sea Kings. Extended nose gear struts for F-4 Phantoms are also furnished for aircraft about to be catapulted. Extensive relief etching is employed for added detail on wheels, rotors, and numerous other parts. | $26.00 | ||
| LP-350-31 | WW2 Liberty Ship | Photoetched details providing parts for Trumpeter's 1/350 scale Jeremiah O'Brien Liberty Ship kit. Parts for both the S.S. Jeremiah O'Brien and S.S. John W. Brown are included as well as additional parts for still more variants.
The railings (measuring the correct 42 scale inches tall) are entirely custom-fitted to every deck on the entire ship and will require no cutting to length or tedious fitting. Two lengths of additional generic railing with two different stanchion spacings (48" and 72") are also being provided for custom work or modifications. Also included in this new set: two complete and distinctive sets of custom fitted stern railings, open bridge platforms with sunshades and related equipment, plus special life raft racks for both the S.S. Jeremiah O/Brien and S.S. John W. Brown; after steering station with helm and related equipment; replacement bulwark and stanchion assemblies for the sides of the lower superstructure; correct pattern inclined and vertical ladders; lifeboat davits with simulated rigging that can be assembled in stowed or deployed positions; boat davit rigging reels; lifeboat oars, rudders, propellers, and stowage chocks; simulated wooden cabin doors in two styles; watertight doors in five styles with open and closed versions of each; six styles of deck hatches; a full set of detailed skylight covers in two sizes; two accommodation ladders with rigging that can be assembled in stowed or deployed configurations; one leadsman's platform with brace and simulated chain rails; detailed pulley bock assemblies in four styles including two styles for heavy lift blocks; ammunition handling davits; large and small cable reels; gunsights, seats, rails, armor, and related details for all ship's armament; grilles for cowl vents; simulated wooden grating for both bridge wings; mast top platforms, rigging fittings, and lookout platform with positionable access hatch; potato bins in two sizes with positionable access slats; four Stokes litters; twelve life preservers; oil tank vents in three styles; simulated anchor chains with hawse pipes; correct pattern cargo hooks in two styles; eight fire hose racks; replacement bilge keels with correct dimensions and detailing plus a drilling jig to aid in installation; late war antenna mast; "mersig" convoy signal light mast; two screw hub spanner wrenches in two sizes; detailed turnbuckles in two sizes (one size for the lower ends of the mast shrouds); and a set of eyebolts for securing rigging to decks and bulwarks. Extra parts of many of the smaller fittings are also provided in the event of loss or damage. Extensive assistance in the form of photographs, drawings, and detailed dimensions has been provided on the design of this set by active duty crew members of the real Liberty Ships Jeremiah O'Brien and John W. Brown. | $69.00 | ||
| LP-350-32 | Admiral Kuznetsov | Correct style retractable safety railing for the forward flight deck complete with a drilling jig to ease installation; correct pattern Russian-type railing (including turnbuckle detail where appropriate) in several styles with over half being custom fitted to the various decks and platforms in the kit; special retractable safety railing for the two flight deck elevators; vertical and inclined ladders; detailed yardarms with associated platforms; parts for all the required radar antennas (Top Plate, Strut Pair, Palm Frond, Cross Sword, Sky Watch, and CADS-1); detailed antennas and dedicated railing for the Cake Stand array; pre-shaped safety netting for the flight deck; all required ECM, direction finder, and other small antennas; cable reels; anemometers; rotors in folded and deployed positions for a total of six Kamov helicopters; details for the ship's boats; watertight doors in two styles; correct pattern perforated catwalks for several areas on the island; windshield wipers for all appropriate areas in the island; fold-to-shape platforms for several areas on the ship; and two 3-D relief-etched bow crests in early and late styles. Fits the Trumpeter kit. | $69.00 | ||
| LP-350-33 | USS Lexington | Specialized railing in several styles with numerous pre-shaped and pre-sized sections for ease of installation; pre-sized safety railing for the No. 2 elevator; fold-to-shape inclined ladders in several sizes; vertical ladders; watertight doors in two correct styles with open and closed options; CXAM-1 radar; D.F. loop antennas; pre-sized and correctly patterned safety rails and safety nets for the flight deck; structural supports for several areas of the ship; details for aircraft and ship's boats; two-position flight deck palisades (windbreak) with correct nimber of panels; replacement yardarm with doublers; life raft paddles; see-through life raft bottoms; pilot house equipment; funnel cap grilles; cable reels in two styles; details for .50 caliber, 20mm Oerlikon, and 5" 25 caliber antiaircraft guns; arresting gear sheaves and barricade supports; correct three-bladed screws for the ship's four propeller shafts; and a figure of Captain Frederick C. Sherman, Lexington's last commanding officer. Extra railings and other fittings included for pre-1942 version. Fits the Trumpeter kit. | $69.00 | ||
| LP-350-34 | USS North Carolina |
This new set is custom designed for the Trumpeter USS North Carolina kit and
contains the following items: custom fitted and pre-shaped main deck railing
with pre-positioned cutouts for chocks and catapults; specialized railing in all
the correct styles for upper decks; 26 watertight doors in the correct size and
in two styles; sixteen inclined ladders in two sizes; twelve lengths of vertical
ladders; SK, SK-2, SC-2, SG, Mk. 3, Mk. 8, Mk. 12, Mk. 22, & Mk. 27 radar
antennas; TDY ECM antenna; two TBS antennas; propellers for OS2U and SC-1
floatplanes; two aircraft catapults; stern crane with hooks & rigging; two
boat crane booms with hooks & rigging; armor shields with folding template,
rails, and gunsights for sixteen (16) 40mm Bofors; similar details for sixty
(60) 20mm Oerlikons; gunsights for twelve (12) 5" dual gun mounts; paddles plus
perforated bottoms for 22 life rafts in two styles; highly detailed replacement
yardarms in the correct sizes for both masts; pre-shaped catwalks and railings
plus funnel cap grilles for both funnels; rudders and chocks for two 26' motor
whaleboats; two leadsman's platforms; detailed deck hatches in five styles; 24
armored covers for bridge portholes; four ladder well coamings with handrails
for superstructure inclined ladders; four cable reels; two anchor hawsepipe
screens; six anchor capstan brakewheels in two styles; and eight life
preservers. Numerous spare parts are included in the event of loss or damage.
This set will provide nearly all the fittings required to completely detail the Trumpeter kit. Additional GMM accessory items such as floater net baskets, extra ladders, extra watertight doors, 40mm & 20mm details,and naval ship decals can be used to supplement this set if desired. | $69.00 | ||
| LP-350-35 | Mikasa |
This new set is custom designed for the Hasegawa Japanese battleship Mikasa kit
and contains the following items: custom fitted and pre-shaped main deck railing
featuring "drooped-chain" detailing and with pre-positioned cutouts for chocks;
specialized and pre-sized railing in all the correct styles for all upper decks
with choice of simulated canvas-covered or non-canvas-covered styles; watertight
doors in all the correct sizes and in several styles; inclined ladders in all
required sizes; vertical ladders; two accommodation ladders with perforated
platforms and associated rigging; relief-etched replacement bridge wing supports
and mast top supports; pre-shaped footropes for all four yardarms; fold-to-shape
forward and aft bridge pilot houses with see-through windows and separate doors;
helm and binnacle for interior of pilot house; pre-shaped handgrabs and funnel
cap grilles for both funnels including an alignment jig to ease assembly;
pre-shaped perforated catwalks for both sides of the hull; relief-etched gunport
covers for gun casemates; rudders, oars, and chocks for ship's boats;
turnbuckles, eyebolts, and pulley blocks for custom rigging work; highly
detailed skylight covers in several styles; two pre-shaped ladder well railings
for gun decks; detailed captain's walk with accurate handrails and relief-etched
ship's nameboard; three anchor hawsepipe screens; anchor handling hardware; and
a 3-D relief-etched figure of Admiral Togo in full uniform with sword and
binoculars. Numerous spare parts are included in the event of loss or damage. This set will provide nearly all the fittings required to completely detail the Hasegawa kit. | $69.00 | ||
| LP-350-36 | Borodino/Varyag | This is a two-in-one detailing set - it provides two complete sets of accurate custom railing sections for both ships (Borodino-class battleships and the cruiser Varyag) - no cutting or guessing will be necessary for a precise fit to the plastic kits with the exception of a small quantity of two-bar railing for Borodino's bridge area. This allows for changes in the ship's appearance from one member of the class to another. In addition, custom fitted inclined ladders, captain's walks with awning frames, skylight covers, bridge equipment, watertight doors, ship's screws, funnel cap grilles, boat oars & rudders, and yardarm footropes for both ships are included. For the two different ships, bow and stern crests, 3-D relief-etched thwarts for ship's open boats, gun armor, anti-torpedo net shelves for Borodino, and accommodation ladders, awning stanchions, and 3-D relief etched boat davits for Varyag are provided. Additional small fittings such as turnbuckles, eyebolts, coaling scuttles, and more are supplied for advanced detailing. The instruction sheet provides assembly procedures for Borodino-class battleships on one side and similar information for the cruiser Varyag on the reverse side. | $69.00 | ||
| LP-350-37 | HMS HOOD |
This set is custom designed for the Trumpeter HMS Hood kit and contains the
following items: custom fitted and pre-shaped main deck railing with
pre-positioned cutouts for chocks, diagonal braces, & turnbuckle detailing;
pre-sized specialized railing in all the correct styles for upper decks with
diagonal braces, turnbuckle detailing, & simulated canvas covering where
necessary; extra lengths of matching 2-bar & 3-bar railing for custom work;
correct size vertical ladders; watertight doors in the correct sizes and in two
styles including open and closed versions; inclined ladders in all required
sizes with detailed footplates; specialized inclined ladders with platform
braces for Admiral's Cabin; detailed Admiral's Cabin window covers; "HOOD"
nameplate letters with alignment jig; highly accurate Type 279 and Type 284
radar antennas; boat crane rigging and hooks in choice of stowed and working
positions; small crane rigging; details for 2 pdr Pom-Pom guns including
elevation rings, gunsights, ammo box covers, & pre-shaped guardrails;
detailed side panels for 4" .45 cal. guns & .50 cal. machine gun mounts;
pre-shaped see-through screens for all intake uptakes; paddles plus see-through
bottoms for life rafts; highly detailed replacement yardarms in the correct
shapes for both masts; funnel cap grilles for both funnels; rudders, oars, &
3-D relief-etched fold-to-shape crutches (chocks) for all ship's boats; details
for davits, griping spars, & jumping nets for two seaboats; detailed awning
stanchions in bipod and tripod styles with matching drilling jigs for both;
fold-to-shape cable reels in three sizes; anchor chain capstan brakewheels;
replacement aerial spreaders; two leadsman's platforms; ladder well railings;
two quarterdeck hatches with fold-to-shape canvas cover frames; four
accommodation ladders with detailed davits, rigging, and footplates with the
name "HOOD" embossed in surface; three anchor hawsepipe cover screens; highly
accurate replacement degaussing cable with correct shapes and clip arrangement
including full-size drawings for modifying raised plastic hull plating above
hawsepipes to the correct shape; pre-shaped Jacobs ladders for boat booms. Extra
turnbuckles, eyebolts, & handwheels are provided for custom work. A detailed
3-D relief-etched figure of VADM L. E. Holland is also included. Numerous spare
parts are furnished in the event of loss or damage.
This set will provide nearly all the fittings required to completely detail the Trumpeter kit. A second add-on Gold PLUS Hood detail set (No. 350-37A) is also available for experts wishing to add a higher level of detail or wanting to "back-date" the Trumpeter kit into an earlier version. | $69.00 | ||
| LP-350-37A | Gold PLUS Hood Extra Details | This set is custom designed for the Trumpeter HMS Hood kit and is intended to complement GMM's No. 350-37 Hood detailing set. It's etched in slightly thicker brass for added depth of detail and contains the following items: Additional watertight doors in the correct sizes and in two styles including open and closed versions; additional fold-to-shape crutches (chocks) for all ship's boats; complete set of 3-D relief-etched skylight covers for U.P. deck; highly accurate replacement davits and griping spars for two seaboats in choice of stowed and deployed positions; 3-D relief-etched thwarts and internal stern gratings for ship's boats; additional detailed awning stanchions in bipod and tripod styles with matching drilling jigs for both; additional small handling davits in several styles; see-through window frames for fighting top; detailed fold-to-shape night life buoys with stowage racks; 3-D relief etched tampions for 15" gun barrels; boat boom brackets for hull sides; highly detailed aircraft catapult and launching shuttle for 1929 - 1932 Hood; struts and propellers for Fairey floatplane provided for scratchbuilders; highly detailed aircraft recovery crane with rigging and hooks for 1929 - 1932 Hood; X-turret aircraft platform sections; detailed jackstaff with bullnose and ensign staff including braces & anchor lights; Extra eyebolts are provided for custom work. Numerous spare parts are furnished in the event of loss or damage. | $39.00 | ||
| LP-350-38 | 1/350 SCALE BUCKLEY/ENGLAND SET | Provides 100% custom fitted railing in several styles including: 1. Pre-shaped and pre-curved sections for main deck (for both fore and aft sections) with pre-positioned openings for chocks and a choice of netted rails or non-netted rails (netting is relief-etched integrally with the railings, so no glueing is needed to attach the nets), 2. pre-sized and correctly detailed rails for all remaining decks; and 3. Extra and alternate railing sections for modifying the superstructure to other configurations. Also furnished are vertical ladders; inclined ladders in two styles (one style for beginning modelers, the other style with twist-to-shape steps and complete with alignment jig for experts; extremely accurate SA radar; details for 20mm Oerlikons, 1.1" machine guns, and 3" 50 cal. gun mounts with gunsights, handwheels, seats, and other fittings as needed; full detailing for Mk. 10 Hedgehog launcher including projectiles and blast shield; depth charge tracks; K-gun loading racks with handling davits; boat rudders and davit details, Stokes battle casualty litters; floater net baskets; oars & see-through bottoms for life rafts; life raft racks in two styles; complete mast detailing including yardarm, ECM and D.F. antennas & optional fighting lights; bridge window frame; detailed bridge instrumentation; cable reels in two sizes; HF/DF antenna; replacement and highly accurate main deck spray shields; gun depression rails for the gun tubs; capstan brakewheel and anchor chains; watertight doors in several styles and in both open and closed configurations including attached coamings for the open versions. A detailed relief-etched figure of England's Captain Walton B. Pendleton is also included. Also provided are a selection of small fittings for expert modelers such as turnbuckles, eyebolts, porthole eyebrow gutters, and arbor heads for the K-gun launchers. Finally, for conversions to a Royal Navy "Captain"-class frigate, the set provides special depth charge stowage racks, an SG radar antenna, details for British ship's boats, and a HF/DF antenna. Fits Trumpeter kit of England. | $31.00 | ||
| LP-350-39 | 1/350 SCALE USS SARATOGA SET | Specialized railing in several styles with numerous pre-shaped and pre-sized sections for ease of installation; watertight doors & pre-sized rails for tops of 8" gun turrets; pre-sized safety railing for the No. 2 elevator; fold-to-shape inclined ladders in several sizes; vertical ladders; watertight doors in two correct styles with open and closed options; D.F. loop antennas; pre-sized and correctly patterned safety rails and safety nets for the flight deck; structural supports for several areas of the ship; details for aircraft and ship's boats; boat chocks in two sizes; two-position flight deck palisades (windbreak) with correct number of panels; replacement yardarms with doublers; pilot house equipment; funnel cap grilles; cable reels in two styles; funnel boat deck braces; details for 5" 25 caliber antiaircraft guns; arresting gear sheaves and barricade supports; correct three-bladed screws for the ship's four propeller shafts; turnbuckles and eyebolts for detailing rigging; and figures of Captains William F. Halsey, John Towers, and Albert C. Read, Saratoga's commanding officers during the late 1930's. Fits the Trumpeter kit. | $69.00 | ||
| LP-350-40 | AIRCRAFT DETAILS | Propellers, interplane struts, cabane struts, wheels, and tailhooks for 1930's USN carrier-based aircraft of the following types: BFC, TG-2, F2F, F3F, SBC, SBU, SB2U and F2A (no wing struts are required for last two types.) Also includes antennas masts for F2A and SB2U monoplanes. Equips six each of all types for a total of 48 aircraft. User-friendly design to ease assembly. Relief-etched for extra detail. | $14.00 | ||
| LP-350-41 | USS Massachusetts & Alabama | This new set is custom designed for the Trumpeter USS Massachusetts &
Alabama battleship kits and contains the following items: custom fitted and
pre-shaped main deck railing with pre-positioned chocks and cutouts for
catapults; specialized railing in all the correct styles for upper decks;
watertight doors in the correct sizes in open and closed positions; sixteen
inclined ladders in two sizes; vertical ladders; SK, SK-2, SC-2, SG, Mk. 3, Mk.
8, Mk. 12, Mk. 22, & Mk. 27 radar antennas; TDY ECM antenna; two TBS
antennas; propellers for OS2U and SC-1 floatplanes; two aircraft catapults;
stern crane with hooks & rigging; two pairs of two different styles of boat
crane booms with hooks & rigging for the first three ships of the South
Dakota-class; rails and gunsights for twenty (20) 40mm Bofors; similar details
for sixty (60) 20mm Oerlikons; gunsights for twelve (12) 5" dual gun mounts;
paddles plus perforated bottoms for life rafts; highly detailed replacement
yardarms in the correct sizes for both masts; rudders and chocks for four 26'
motor whaleboats; two leadsman's platforms; four cable reels; two anchor
hawsepipe screens with spares; anchor capstan brakewheels in two styles with
spares; replacement bridge with see-through fold-to-shape windshield frames, six
Stokes stretchers, and eight life preservers plus an assortment of eyebolts and
turnbuckles for superdetailing the ship's rigging. Numerous spare parts are
included in the event of loss or damage.
This set will provide nearly all the fittings required to completely detail either of the Trumpeter kits. Additional GMM accessory items such as floater net baskets, extra ladders, extra watertight doors, 40mm & 20mm details, and naval ship decals can be used to supplement this set if desired. | $69.00 | ||
| LP-350-42 | TAKAO | Contains custom fitted and highly detailed main deck and upper deck railings featuring a "drooped chain" appearance; additional railings in several other styles with some sections pre-sized and pre-shaped to fit upper decks, and others offering a choice of simulated canvas coverings for searchlight platforms, etc.; pre-sized rails for the tops of the main gun turrets; two pairs of midships aircraft catapults in two different styles with full interior detailing; aircraft trolleys with shuttles in two styles, aircraft & boat crane with rigging and hook; chocks, rails, & other details for the ship's boats; struts, propellers, & other details for all ship's aircraft types; operators' seats, gunsights, & controls for several types of 25mm antiaircraft guns; three radars of two types; pre-shaped and precisely-fitted maintenance footrails and funnel cap grilles for the funnels; correctly-detailed replacement forward funnel brace structure; accurately detailed yardarms; plus the usual assortment of vertical and inclined ladders, watertight doors, cable reels, eyebolts, turnbuckles, boat davit rigging, and many other fittings. | $69.00 | ||
| LP-350-42A | GOLD PLUS TAKAO EXTRA PARTS | This set supplements GMM Set No. 350-42 (1/350 Takao) and adds further levels of detail to the Aoshima kit of the Takao and her sisterships. Contains a complete pe-shaped 3-D relief-etched degaussing cable for later versions of the ship; detailed platform & rails for forward funnel; correctly detailed replacement bracing structures for both masts; replacement fold-to-shape towers for 25mm machine gun mounts and searchlights; detailed thwarts for 9m open boats; a full set of awning stanchions in several styles; two accommodation ladders with davits & canopies; rudders and/or propellers for ships' boats; boat booms with rigging; folded davits for hull sides; 3-D relief-etched davits for ships' boats; torpedo loading davits; 3-D relief-etched sighting covers for main gun turrets; open grilles for all ventilation and air intakes; life rings & racks; leadsman's platforms; flag and jack staffs; control wheels for torpedo tubes; capstan brakewheels; searchlight grilles; detailed brass capstrips for linoleum covered decks; propellers guards; D.F. antennas; and a binnacle for the ship's bridge. | $44.50 | ||
| LP350-43 | IJN BATTLESHIP | Contains detailed main deck and upper deck railings featuring a "drooped chain" appearance; solid-type railings for upper decks and platforms, chain rails for the tops of the main gun turrets; two aircraft catapults in two different styles with full interior detailing; aircraft trolleys with shuttles in two styles, aircraft & boat cranes in two styles with rigging and hook; chocks, rails, & other details for the ship's boats; struts, propellers, & other details for all ship's aircraft types; gunsights & controls for single mount 25mm antiaircraft guns; three radars of two types; footropes for yardarms; bridge details; accommodation ladders; bridge window frames in three different sizes; plus the usual assortment of vertical and inclined ladders, watertight doors, cable reels, eyebolts, turnbuckles, boat davit rigging, and other fittings. | $69.00 | ||
| LP-350-44 | SAN FRANCISCO | This set is intended to fit the Trumpeter 1/350 scale kit of the U.S. Navy WW2 heavy cruiser USS San Francisco and her sisterships. Contains custom-fitted railing for the main decks plus ample railing in several styles for all remaining decks and platforms; Inclined and vertical ladders; SK, Mk. 3, Mk. 4, SM-1, SC, SC-2, & SG radars; funnel cap grilles and detailed catwalks for both funnels; armor and/or other details for 40mm Bofors guns, 20mm Oerlikon cannon; 5" 25 cal. gun mounts, & 1/1 inch quad machine guns, see-through bottoms for all life rafts; life raft paddles; correctly detailed replacement yardarms for both masts; watertight doors in open and closed positions; cable reels in two sizes; correctly detailed replacement searchlight platform; two detailed aircraft catapults; two crane booms and rigging; accommodation ladder with davit; rudders, pulpit rails, aft decks, & support cradles for ships' boats; struts and propellers for two SOC Seagull seaplanes; two depth charge roller tracks; life buoys & racks; life rings; two leadsman's platforms; eight replacement 3-D relief-etched splinter shields for 5" 25 cal. gun mounts; assorted hand wheels; two propellers guards; and a binnacle for the ship's bridge. | $69.00 | ||
| LP350-45 | BUCHANAN | This set has been designed to fit Dragon's
USS Buchanan/Gleaves-class destroyer in 1/350 scale.
The set includes a pre-shaped set of relief-etched netted main deck rails custom-sized to precisely fit the Dragon kit. A full set of standard rails for the upper decks in several styles, included simulated canvas-covered types, are also provided. Additional items supplied: Vertical and inclined ladders; depth charges roller racks; K-gun loading racks & handling davits; 40mm and 20mm anti-aircraft gun details; see-through life raft bottoms and life raft paddles; propeller guards; precisely fitted funnel footrails and handrails for both funnels; boat details and rigging; mast and yardarm details; a pair of pilot house lookout platforms; Mk. 12, Mk. 22, SA, SC, SC-2, and SG radars; ECM antennas for post-WW2 variants; Stokes litters; watertight doors; floater net baskets; life preservers, antenna brackets; simulated anchor chains; capstan brake wheels and assorted control wheels; replacement latticework for aft searchlight tower; jackstaff and flagstaff; eyebolts and turnbuckles for superdetailing rigging; figure of fictional character LCDR Philip Francis Queeg from the novel & film The Caine Mutiny.
| $44.00 | ||
| LP350-46 | KIROV-class Battlecruisers | GMM's new Kirov set is designed to be exceptionally
user-friendly, especially concerning the design and assembly of the
extremely complex Russian radars and yardarm assemblies. A minimal parts
count combined with a reduced need to glue parts together and GMM's unique
"tab-and-slot" construction results in a beautifully detailed
collection of fittings that most modelers will be able to handle. Our
careful usage of actual Russian drawings of the Kirov and close-up photos of
Russian naval radars and other items makes this the most technically
accurate PE detail set ever released for this class of ship.
The set supplies highly accurate replicas of all air search, surface search, and fire control radars carried by various ships of this class including the Top Pair, Top Steer, Top Plate, and Plate Steer radars. Also included are three Palm Frond radars, two sets of Strut Pair radars, two pairs of Cross Sword radar antennas, replacement Pop Group radar antennas, and assorted ECM and direction finding antennas. Additional items provided include deployed and folded helicopter rotors for two Kamov helicopters, details for the ship's boats, correctly configured helicopter landing pad net & safety nets, a highly detailed missile loading crane, replacement one-piece fold-to-shape yardarm, replacement fold-to-shape Vee-Tube antenna mast & sensors, replacement platforms for ECM antennas, an Aft Light assembly, correctly configured five-blade ship's screws, rigging and hooks for the two ship's cranes, accommodation ladders, vertical & inclined ladders, and dedicated Russian-design railing complete with accurate turnbuckle detailing where required. This set will allow a modeler to configure the Trumpeter kit into any version of the Russian Kirov-class battlecruisers. It also features extensive 3-D relief etching in .005" brass for extra detail as well as extra fine railings and antennas. | $69.00 | ||
| LP350-47 | UDALOY | GMM's new Udaloy set is designed to be exceptionally user-friendly, especially
concerning the design and assembly of the extremely complex Russian radars and
mast platform assemblies. A minimal parts count combined with a reduced need to
glue parts together and GMM's unique "tab-and-slot" construction results in a
beautifully detailed collection of fittings that most modelers will be able to
handle. Our careful usage of actual Russian drawings of the Udaloy and her
sisterships and close-up photos of Russian naval radars and other items makes
this the most technically accurate PE detail set ever released for this class of
ship.
The set supplies highly accurate replicas of all air search, surface search, and fire control radars carried by various ships of this class including the Top Plate, Strut Pair, Cross Sword, and Palm Frond radars. Also included are assorted ECM and direction finding antennas. Additional items provided include deployed and folded helicopter rotors for two Kamov helicopters, details for the ship's boats, correctly configured helicopter landing pad nets & deck edge safety nets for both Udaloy and Admiral Pantaleyev kits, replacement platforms, support girders, topmasts, & related details for both masts, replacement antenna towers, flag- and jack-staffs, rigging & hooks for the ship's crane, accommodation ladders, vertical & inclined ladders, bridge windshield wipers, detailed vent grilles for bulkheads, and dedicated Russian-design railing complete with accurate turnbuckle detailing where required. This set will allow a modeler to configure the Trumpeter kit into any version of the Russian Udaloy-class guided missile destroyers. It also features extensive 3-D relief etching in .005" brass for extra detail as well as extra fine railings and antennas. | $69.00 | ||
| LP350-48 | IJN EXTRA RAILINGS | 6,000 scale feet, or approximately 205 linear inches, of World War Two Imperial
Japanese Navy warship style railing including "drooped chain" styles and solid
pipe rails. Also includes simulated canvas-covered 2-bar rails and pre-curved
chain rails for upswept forward decks. Styles and quantities are as follows:
Pre-curved bow chain rails: two sections, each 9.125 inches long. Style 1 - main deck chain rails: nine (9) sections, each 9.375 inches long. Style 2 - upper deck chain rails: seven (7) sections, each 9.375 inches long. Style 3 - upper deck two-bar pipe rails: three (3) sections, each 9.375 inches long. Simulated canvas-covered pipe rails for upper decks: two sections for a total of 11.375 inches. Simulated chain rails feature individual link detailing. Simulated canvas-covered rails feature relief-etched "canvas" with see-through lacing holes. Illustrated instructions are included. | $44.00 | ||
| LP350-49 | WW2 USS GEARING DD710 cl. | This set is designed to precisely fit the Dragon 1/350 scale
kit of the World War Two U.S. Navy destroyer USS Gearing (DD-710) and its
sisterships. A number of alternate fittings such as depth charge tracks and
other parts are supplied. You will have some parts left over when your project
is complete.
Included is a full set of custom-fitted and pre-shaped main deck rails with integral netting and correctly positioned chocks. Also supplied is a set of custom-fitted 01 level rails. Additional railing sections in several styles are provided for custom work including simulated canvas-covered rails and tapered rails for the aft funnel platform. Other items furnished include vertical and inclined ladders, depth charge tracks and stowage racks, K-gun loading racks with handling davits, 40mm and 20mm anti-aircraft gun details, 5" gun captain sights, pre-shaped ready ammunition racks for all 40mm gun mount tubs, propeller guards, anchor chains, jackstaff & flagstaff, funnel cap grilles, funnel cap handrails, whistle platform & rails, floater net baskets, boat details, see-through bottoms & paddles for all life rafts, mast & yardarm details, Mk. 12, Mk. 22, SC-4, SR, and SG radars, ECM antennas, three fold-to-shape see-through director towers, two sets of torpedo tube control stands, antenna brackets for funnels & superstructure, Stokes litters, watertight doors, swab & broom rack with extra swabs & brooms, turnbuckles, eyebolts, life rings, capstan brake wheels and assorted control wheels. SCALES AVAILABLE: 1/350 Fits Dragon's Gearing . | $69.00 | ||
| LP350-50 | Russian Slava-class guided missile cruisers | GMM's new Slava set is designed to be exceptionally
user-friendly, especially concerning the design and assembly of the
extremely complex Russian radars and mast platform assemblies. A minimal
parts count combined with a reduced need to glue parts together and GMM's
unique "tab-and-slot" construction results in a beautifully
detailed collection of fittings that most modelers will be able to handle.
Our careful usage of actual Russian drawings of the Slava and her
sisterships and close-up photos of Russian naval radars and other items
makes this the most technically accurate PE detail set ever released for
this class of ship.
The set supplies highly accurate replicas of all air search, surface search, and fire control radars carried by various ships of this class including the Top Pair, Top Steer, Top Plate, Pop Group, Front Door, and Palm Frond radars. Also included are assorted ECM and direction finding antennas. Additional items provided include cooling hoses and door support cylinders for the gun turret, deployed and folded helicopter rotors for two Kamov helicopters, details for the ship's boats, correctly configured helicopter landing pad nets & deck edge safety nets, replacement platforms, support girders, topmasts, & related details for the mast, replacement antenna towers, flag- and jack-staffs, rigging & hooks for the ship's crane, accommodation ladders, vertical & inclined ladders, bridge windshield wipers, detailed vent grilles for bulkheads, pre-shaped rails for the SS-N-12 missile exhaust ducts, and dedicated Russian-design railing complete with accurate turnbuckle detailing where required. This set will allow a modeler to configure the Trumpeter kit into any version of the Russian Slava-class guided missile cruisers. It also features extensive 3-D relief etching in .005" brass for extra detail as well as extra fine railings and antennas.
| $70.00 | ||
| LP350-51 | HMS Repulse | This set is custom designed for the Trumpeter HMS Repulse kit and contains the following items: custom fitted and pre-shaped main deck railing with pre-positioned locations for chocks & diagonal braces; vertical ladders; watertight doors in open and closed versions; inclined ladders in all required sizes; Type 284 radar antenna; two complete boat cranes with rigging and hooks; details for 2 pdr Pom-Pom guns including elevation rings, gunsights, ammo box covers, & pre-shaped guardrails; gunsights, armor shields, handwheels, and shoulder rests for 20mm Oerlikon cannons; see-through screens for intake uptakes; paddles plus see-through bottoms for life rafts; highly detailed replacement yardarms in the correct shapes for both masts; funnel cap grilles for both funnels; rudders, oars, & 3-D relief-etched fold-to-shape crutches (chocks) for ship's boats; cable reels in two sizes; anchor chain capstan brakewheels; six accommodation ladders with detailed davits & rigging; jackstaff & flagstaff; struts & propellers for Walrus seaplane. Extra turnbuckles, eyebolts, and porthole rigols (gutters) are provided for custom work. Numerous spare parts are furnished in the event of loss or damage. | $70.00 | ||
| LP350-52 | USS
INDIANAPOLIS CA35
|
This set is intended to fit the Academy 1/350 scale kit of the U.S. Navy WW2 heavy cruiser USS Indianapolis and her sistership Portland in 1944 or 1945 rigs. With minor adjustments, it can also be used on the Trumpeter kits of the same ships in the same scale. Contains custom-fitted railing for the main decks plus ample railing in several styles for all remaining decks and platforms; inclined and vertical ladders; SK, SG, Mk. 3, Mk. 8, & Mk. 12 radars; TDY & TDY-1 ECM antennas; funnel cap grilles and detailed catwalks for both funnels; details for 40mm Bofors guns; pre-shaped ready ammunition racks for all 40mm Bofors gun tubs; armor shields and other details for single and dual 20mm Oerlikon cannon; rails for 5" 25 cal. gun mounts; see-through bottoms for all life rafts; tiedown rigging for turret-mounted rafts; life raft paddles; correctly detailed replacement yardarms and see-through platforms for both masts; watertight doors in open and closed positions; cable reels in two sizes; two detailed aircraft catapults; crane boom and rigging; accommodation ladders with davits; rudders and manropes for ships' boats; struts and propellers for two SOC Seagull seaplanes; propellers for two SC-1 seaplanes; life rings; two leadsman's platforms; two propellers guards; windshield for open bridge; detailed replacements for jackstaff and flagstaff; swab and broom racks; floater net baskets; figure of CAPT Charles B. McVay III. | $70.00 | ||
| LP-350-1D | NAVAL SHIP DECALS (1/350 - 1/400 SCALE) | Shaded hull numbers (5/16", 7/32", and 1/8" tall in 1/350 scale; 5/32", 7/64" and 1/16" tall in 1/700 scale), unshaded hull numbers (1/16" tall in 1/350 scale; 1/32" tall in 1/700 scale), Roman and Arabic numeral draft marks, catapult aircraft insignia, warning stripes, auxiliary ship hull markings, Plimsoll marks, various carrier flight deck stripes, hangar door stripes, "E" efficiency markings in white and red. | DISCONTINUED |
| LP-350-2D | CVN ENTERPRISE "LO-VIZ" AIR WING DECALS - WEST COAST (1/350 SCALE) | Squadron markings in low visibility (with some high visibility) for 1/350 Tamiya Enterprise carrier aircraft when ship was based on the U.S. West Coast in 1980's. Marine markings also supplied for F/A-18s. Equips 32 aircraft of nine different types (Four A-6, four A-7, four F-4, four F-14, four F-18, four EA-6B, four S-3, two SH-3, and two E-2.) Four sheets required for a complete air wing. National insignia and "Navy" markings not furnished (these are supplied with the Tamiya aircraft kits.) | DISCONTINUED |
| LP-350-3D | CVN ENTERPRISE "HI-VIZ" AIR WING DECALS (1/350 SCALE) | DISCONTINUED | DISCONTINUED |
| LP-350-4D | CVN ENTERPRISE "LO-VIZ" AIR WING DECALS - EAST COAST (1/350 SCALE) | Five-color decal set (one sheet) that fits aircraft in Tamiya's 1/350 scale USS Enterprise kit (CVN-65.) Represents air wing markings as seen aboard the Enterprise since its transfer to the U.S. East Coast. Provides simulated canopies and squadron markings for 28 aircraft of six different types (four A-6, four EA-6B, two E-2C, eight F-14, six F-18, and four S-3.) Air Wing CVW-17 (tail code AA) includes markings for VAQ-132, VFA-81, VFA-83, VF-84, VF-103, VA-75, and VS-30. Also furnished are nose numbers, national insignia, nose and tail graphics, wing markings, "NAVY" graphics, intake warnings, and wingwalks for E2C aircraft. Simulated dark gray canopies eliminates the need for tedious hand-painting of aircraft canopies. | DISCONTINUED |
| LP-350-5D | NAVY JET CANOPY DECALS (1/350 SCALE) | Fits aircraft in Tamiya's 1/350 scale USS Enterprise kit (CVN-65.) Provides simulated canopies in dark gray for 40 aircraft of nine different types (four A-6, four EA-6B, four E-2C, four A-7, four H-3, four F-14, four F-18, four S-3, and eight F-4.) Eliminates the need for tedious hand-painting of aircraft canopies. Can also be used with GMM Decals 350-2D Lo-Viz (West Coast) and 350-3D Hi-Viz A/C Decals. | $5.00 |
| LP-350-6D | WW2 USN AIRCRAFT DECALS (1/350 SCALE) | A single 10" by 4" sheet that contains hundreds of markings in full color including national insignia in four sizes (24", 36", 48" and 60" diameters) and for five historical periods (pre-WW2 to 1942, 1942 to June 1943, June 1943 to Oct. 1943, Oct. 1943 to 1947, and 1947 to present day (these latter being intended for modelers building Essex-class ships in Korean war configuration.) Total number of all national insignia in all sizes and eras: 532. Also on the sheet are alphabet letters in one size (24" high) and numbers in two sizes (24" and 36" high) with both printed in two colors: black and white. Five alphabet sets are white, two are black, and all are 24" high. There are 42 sets of numerals from 1 through 0 provided; twenty sets are 24" high and 22 are 36" high with half printed in white and half in black. White "NAVY and "MARINES" markings are supplied, too; 34 36" NAVY's, 12 48" NAVY's, and 22 36" MARINES'. A small number of other useful markings are also provided. Up to ten aircraft in each era's markings can be equipped with this decal; in some cases, twenty or more can be outfitted depending on aircraft size. A full air wing for one era will require about four sheets. | DISCONTINUED |
| LP-350-7D | WW2 USN CARRIER DECALS (1/350 SCALE) | Two 9" by 4" sheets that contain large black numerals for the flight decks of World War Two U.S. Navy Fleet Aircraft Carriers, particularly Yorktown and Essex-class ships. The decal provides numbers in the following quantities: 1 x 4; 2 x 4; 3 x 4, and 4 through 0 x 2 each. Also supplied are the following ships' names in black: Lexington (two names provided), Saratoga (two names provided), and one sample each of Wasp, Yorktown, Enterprise, Hornet, Essex, Intrepid, Franklin, Ticonderoga, Randolph, Bunker Hill, Hancock, Bennington, Boxer, Bon Homme Richard, Leyte, Kearsarge, Antietam, Princeton, Shangri La, Lake Champlain, Tarawa, Valley Forge, and Philippine Sea. All decals are printed in flat black with the deck numerals having flat clear carrier film over the color image areas only. All numbers have correct configurations and sizes based on study of aerial photos of actual WW2 USN carriers. WARNING! The large flight deck numbers have been designed to eliminate the clear carrier film effect from the hollow areas of the numbers and this makes the decal numerals EXTREMELY delicate after they have been dipped in water. To avoid problems, allow the image to thoroughly loosen from the paper backing sheet and slide the image VERY GENTLY using small movements onto the plastic model's surface. Make certain the model's surface is thoroughly wetted before attempting to slide the decal onto it or tearing and fracturing may result. MODELER'S TIP: Use a number that won't be needed on your model to practice your techniques before committing yourself to the actual numbers you need. | $9.00 |
| LP-350-8D | USN Nuclear Carrier Decals | A decal set comprising two 4" by 10" sheets printed in six colors: (black, white, red, yellow, blue, and green) plus clear, that provides the following markings: FOR ALL SHIPS: Eight red warning circles in two sizes for rotating weapons mounts; twelve bomb jettison ramp markings for flight decks; assorted awards with hashmarks in full color and in three sizes for bridge wings; assorted sets of campaign ribbon groups in full color; national ensigns and jacks in both straight and "windblown" formats; yellow & red flight deck elevator and ordnance elevator striping; white and red forward flight deck striping; Underway Replenishment markings in several styles for elevator edges and nearby superstructure areas; ten sets of underwater hull draft markings in black & white; 18 sets of Flight Deck Electrical Power Hatch striping; numbers for Tow Tractors in two sizes; FOR ENTERPRISE: Hollow white outlined flight deck numbers in the correct shape (Tamiya's molded engraved lines depict an incorrectly shaped "65"); "Big E" marking for rear of island; "USS ENTERPRISE CVN-65" titles for the island front in two sizes and three variations for three different eras; Aviation Boatswains' Mates' Wings, ship's plaque, and small black eagle for lower island front; five "Beware of Jet Blast Propellers and Rotors" signs in four styles for different eras; "Hormuz Highway Patrol", kill marks, and related awards for late 1980's period. FOR NIMITZ-CLASS: Correctly shaped hollow and solid numbers for flight decks including one set of oversize solid "68" numerals for an early Nimitz; correctly shaped shadowed and non-shadowed white numbers for islands of all ships in the class; assorted island signs for damage control equipment; twelve different sets of Aviation Boatswains' Mates' wings for all ships' island fronts to represent a variety of eras; and nine sets of "Beware of Jet Blast Propellers And Rotors" warning signs for islands representing all ships and several eras. The heavily illustrated instruction sheet provides detailed information on usage and proper display of all the above markings. | DISCONTINUED |
| LP-700/350-1 D | INTERNATIONAL FLAG DECALS (1/700 & 1/350 SCALE) | Ensigns and jacks for US, Canada, UK, Australia, Germany, France, Japan, and USSR from 1933 to 1990 in four sizes each, and merchant house flags for ten lines (Cunard, United States Lines, etc.) in two sizes each. All flags in "windblown" format. Also includes Canadian Maple Leaf funnel insignia in two sizes. Over 200 flags in all. 1/350 and 1/700 ensigns measure five scale feet tall by eight scale feet long. | DISCONTINUED |
| LP-200-1 | 1/200 scale IJN Yamato and Musashi | Railing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. | $134.00 |
| LP-200-2 | 1/200 scale TWO-BAR RAILING | Over 2,500 scale feet of railing, plus vertical ladders and rigging. The Two-Bar set (No. 200-2) features "drooped" chain-type railing for approximately one half of the total railing in the set. Manufactured in brass. Fits Nichimo and Heller kits. | $69.00 |
| LP-200-3 | 1/200 scale THREE-BAR RAILING | Over 2,500 scale feet of railing, plus vertical ladders and rigging. The Two-Bar set (No. 200-2) features "drooped" chain-type railing for approximately one half of the total railing in the set. Manufactured in brass. Fits Nichimo and Heller kits. | $69.00 |
| LP-240-4 | 1/240 scale REVELL OLYMPIA AND GLENCOE OREGON | (Equips both models)Railing in several styles including simulated "drooped chain" main deck rails and solid-type upper deck rails. Specially sized railing sections for various decks. Vertical ladders, ratlines, Inclined ladders with twist-to-shape treads, perforated walkways, funnel cap grilles, mast details, eyebolts for rigging, yardarm footropes, ship's wheel, crane fittings, assorted deck fittings. Fits classic Revell kit of Olympia or classic ITC/Glencoe kit of Oregon. (Enough parts to complete both models) | $69.00 |
| LP-240-5 | 1/240 scale REVELL BUCKLEY, BLIGH AND WARD | (Equips both models)Railing in several styles including pre-shaped sections for main decks, vertical and inclined ladders, radar, gun details, depth charge tracks, K-gun loading racks, boat details, propeller guards, antennas, bridge window frames, ship's wheels, watertight doors. Fits classic Revell kits of Buckley, Blessman, Ward, and Aaron Ward. | $69.00 |
| LP-250-6 | 1/250 scale YAMATO / MUSASHI | Railing in several styles including "drooped chain" and solid types with pre-shaped sections for upswept bow and special sections for gun turrets. Vertical and inclined ladders, aircraft catapults, aircraft handling trolleys, crane, and propellers. Type 13 and Type 21 radars, gun director details, RDF antennas, funnel cap grilles, 15.5 cm turret blast bag restrainers, watertight doors, wind direction indicators. ****Fits all 1/250 scale kits | $134.00 |
| LP192-1 | 1/192 scale WW2 MISSOURI |
Railing in several styles including pre-shaped sections for
upswept bow, vertical and inclined ladders, aircraft catapults and recovery
crane, cable reels, 20mm gun armor shields, funnel cap grilles, Mk. 37 director
radars, SK, SK-2, Mk. 3, Mk. 27, and SG radars, ECM antennas, yardarms, bridge
window frames, aircraft propellers, watertight doors, and assorted bulkhead
details. SCALE AVAILABLE: 1/192 - For scratch built models. Includes surrender table & chairs. | $134.00 |
| LP-192-2 | 1/192 scale MERCHANT SHIP | Railing in several styles, vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania. | $134.00 |
| LP-192-1D | NAVAL SHIP DECALS (1/192 - 1/200 SCALE) | Shaded hull numbers (1", 3/4", 1/2", and 1/4 tall in 1/96 scale; 1/2", 3/8", 1/4" and 1/8" tall in 1/192 scale), un-shaded hull numbers (1/8" tall in 1/96 scale; 1/16" tall in 1/192 scale), Roman and Arabic numeral draft marks, "E" efficiency markings in white and red, First Aid, High Voltage, Decontamination, and No Smoking placards. | DISCONTINUED |
| LP-HD1 | Photoetching For The Plastic Ship Modeler | A 32-page soft-cover handbook with plenty of hints and tips for the first-time user of Gold Medal Models photoetched metal fittings for model ships. Contains chapters on available products and materials, appropriate kits, preparation and tools, attaching railings, assembling catapults, cranes & similar fittings, installing ladders, painting, and correcting mistakes. Includes almost 90 photos (including nine new photos added for this latest printing.) Available now. | $12.00 |
ORDER FORM for online ordering
